Cinnamon Roll Clicker Keychain - 3D Printed
Cinnamon Roll Clicker Keychain - 3D Printed
Couldn't load pickup availability
Mini Cinnamon Roll Clicker Keychain
Add a little fun to your everyday essentials with these 3D printed clicker keychains! Perfect for keeping your hands busy, adding to your keys or bag, or gifting to someone who loves a satisfying little fidget.
Each keychain features a fun clicker design and a convenient attachment for your keys, backpack, purse, or market bag.
Product Details:
-
3D printed clicker keychain
-
Lightweight and easy to take on the go
-
Attached keychain loop for easy carrying
-
Each piece may have slight variations due to the 3D printing process
Safety Information:
-
Not intended for children under 3 years of age. Recommended for older children and adults.
-
Contains small parts and may pose a choking hazard.
-
Not a toy intended for rough play. Use with adult supervision when appropriate.
-
Keep away from heat and direct sunlight, as high temperatures may cause the material to soften or deform.
-
Inspect before each use. Discontinue use if the item becomes damaged, cracked, or broken.
-
Do not place in the mouth or attempt to pull apart the components.
-
This item is not intended for teething or as a chew toy.
Please Note: This is a 3D printed item. Minor surface variations and layer lines are normal characteristics of the printing process and are not considered defects.
HOW TO APPLY
HOW TO APPLY
UVDTF Application Instructions:
- Clean glass with mild soap and water (alcohol NOT recommended)
- Wrap decal around glass and trim any excess from the sides of the decal as necessary to fit your glass. Try to avoid overlapping the wrap when applied to the glass can.
- Peel the clear backing off of decal
- Line up the decal onto the glass can and apply the decal to the glass. Starting on one side, press the wrap down, working your way up and down on the glass. The adhesive is very strong; it cannot be removed once applied to the glass.
- Using a squeegee or your fingers, rub the decal well to adhere it the the glass and to work out any air bubbles.
- Gently peel off the clear film
DTF Transfer Application Instructions
**please remember this is a starting point recommendation.
Temperature and time may need to be adjusted as you feel necessary
- Preheat the garment for 10 seconds to remove excess moisture. Let the garment cool before adding the transfer.
- Place the transfer on the shirt white side down, image facing up.
- Press at 300-325 for 10-15 seconds under very firm pressure.
- Remove the garment from the press and let it stand to cool.
- Peel COLD
- Apply Teflon or parchment sheet over design and press for another 10 seconds at medium pressure.
Disclaimer- Commercial heat press is required for our transfers. We are NOT responsible for transfers that are pressed incorrectly
CARE INSTRUCTIONS
CARE INSTRUCTIONS
UVDTF Glass Care Instructions:
HANDWASH ONLY, NOT microwave safe, NOT dishwasher safe
DTF Shirt Washing Instructions:
Turn the garment inside out. Machine wash cold. No bleach. No softener. Do not dry clean or iron. Tumble dry low.
SIZING
SIZING
UVDTF 16oz wraps and decals
Sized for MOST 16oz glass cans
*Best fit on Libbey 209 glasses
UVDTF Decals- 3.5-4 inches in height by proportion, fit nicely on both 16 and 20oz glasses.
16 oz Full Wraps- 9.4x4 inches (sized perfectly for Libbey 209 glasses) Works for most 16oz can glasses.
20oz Full Wraps- 9.3x5.2 inches (sized perfectly for Libbey 266 glasses) Works for most 20oz can glasses
DTF transfers- 10.5-11 inches max width/height by proportion
RETURNS
RETURNS
We do not accept returns, however if you have an issue with your order, I'm happy to make it right! Send us an email @parkerraedesigns@gmail.com
We are not responsible for user error when applying the wraps, damage when applying, wraps not fitting your cups, or damage from cup care.
I do my best to capture true colors but due to monitor differences colors may appear slightly different.

